Premium Color Silicone

SKU: HS-3207-5

Restore, waterproof, and lengthen the life of your roof while also giving it a beautiful aesthetic appeal with our Premium Color Silicone Roof Coatings. These products are 100% silicone and over 95% solids content, meaning what you put on the roof stays there after it cures. 

Available in: Hunter Green, Barn Red, Colonial Red, Dark Brown, Regal Blue, Slate Blue, and Burnt Orange in 1, 5, and 55-gallon containers.

Application: Spray or roll-apply.

Notes: Our Premium colors are not available for online purchase. Contact your sales rep today to order.

Premium colors are pre-formulated, which means we can quickly produce them for you, but we often have to wait on pigment delivery from suppliers which can take up to 4 weeks. Allow for additional lead time and upcharges when ordering this material.


Our Premium Color Silicone is made from the same formulation as our High Solids Silicone Roof Coating, with the color pigments being the only change. 

Note: Our Premium Color Silicone roof coatings are designed to meet most color variation requirements, but if they do not meet your needs, we can also color match and provide completely custom color silicone for your project.


Prep: Prior to starting your roofing project, prep the roof by power-washing, removing dirt and debris, and making any necessary repairs. Ensure roof is completely dry prior to applying silicone. For more detailed preparation instructions, view our Technical Resources page. 

Mix: It is recommended that any silicone product be mixed with a drill mixer for ~5 minutes prior to application.

Application: The application rate and method for our Premium Color Silicone Roof Coating depends on the substrate you are restoring. Our Silicone Coverage Guide is a great tool to determine how much material you’ll need for the job and at what rate you need to apply it. 

Equipment: Our Premium Color Silicone should be applied via spray equipment (We recommend the Graco 933) or roll-applied using a medium nap roller. 

Cure Time: Our Premium Color Silicone cures in 1-4 hours under normal weather conditions and is tack-free in 1-2 hours. Because conditions vary, it is recommended that you exercise caution prior to walking on recently applied coating.

Weather Restrictions: To ensure optimum performance, it is recommended that you do not apply this product when surface temperatures are below 40 degrees. In cold-weather applications, material should be kept indoors until immediately before application. It is also recommended that you do not apply this material while rain is falling. Rain will not cause silicone to wash off, but the substrate will become wet and will negatively impact adhesion.

For more detailed application instructions, check out our installation specifications.

Technical Documents